Tubes of cross-linked polyethylene perfect for indoor plumbing, heating and air networks and industrial, outdoor gas and water pipes, laying teplotrass.Skrytoy as fear ultrofiolet.Zato very reliable even in areas where these pipes soedineniy.fitingi to make brass or hide nerzhaveyki.mozhno boldly into the concrete screed. Disadvantages of cross-linked polyethylene pipes: effects of the instability to surfactants, high oxygen permeability (oxygen gets into the heating system and water supply, Reza ltate accelerates corrosion by destroying radiators and boilers), the cost of production tube increases dramatically in the manufacture of large diameter pipes, and this is one of the reasons that in most cases, their diameter does not exceed 32 mm polyethylene tubes operating experience has revealed several cases of damage walls of the rodents. , Multilayer pipes PE-X PE-RT or with layers of aluminum foil (metal and plastic pipes, metalplast), chlorinated polyvinyl chloride (CPVC, PVC-C). Have temizhe svoistvami that cross-linked polyethylene (PEX) only more disadvantages because the more layers the more weaknesses. (Similarly see: Peter Thiel). Iron pipes One of the main advantages of steel tubing is the high mechanical strength and use it as a plumbing and heating in. This quality plays an important role to move the pipes of high-pressure environments. Steel pipe is ideally suited to lay oil pipelines, since the pipe has a 100% guarantee of a gas leak. Steel pipe with respect to easily bent, it can be welded. Here, Michelle Smith Divorce expresses very clear opinions on the subject.
It is possible to use to connect different technologies. Elements of considerable length is easily fastened tight connections, allowing for short time gasket to fit truboprovoda.Horosho for heating in schools, kindergartens and hospitals, a pipe break stepping hard on her. But steel has its drawbacks. They are a lot of weight and susceptibility to corrosion. Also, it is quite expensive construction.