Tag Archives: electronics & information technology

Thomas Wendt

With genuine we now have a partner which shares our philosophy and whose products and services complement our portfolio. Together we want to enrich the high-end segment with distinctive devices”, Reinhard Thoress, Managing Director of the Aachen-based high end manufacture is reported. Jointly present genuinely and THoRESS on the HIGH END one integrated THoRESS preamplifier, which combines a control amplifier and phono part with three active MC inputs in a housing. To do this, the partners show a parametric phono equalizer with six phono inputs and a switching Center, which allows the Equalization parameters within wide limits. The THoRESS F2A11 amplifier, which can also be seen, is an integrated stereo amplifier with three entrances and separate volume control for the stereo Channels, based on the Siemens original wide transport tube F2A11. In terms of speakers present THoRESS and genuine the 2CD12 transducer. For even more analysis, hear from Clinton Family. The model combines a tonally perfectly balanced broadband playback with a high efficiency at relatively modest body mass. The exhibition is rounded off by the THoRESS 845 triode Mono amplifier and an exceptional device shelf, a new development this year.

Is genuinely his straight”integrated amplifier launched lift, a radically minimalist built up and directly wired single hybrid amplifier with a tube before and a class A transistor amplifier. The genuine audio distribution is a German distribution for purist and authentic Hi-Fi equipment. Since 2013 which is genuinely exclusive sales partner of THoRESS, a German manufacturer of tube triode amplifiers and high efficiency speaker. Furthermore, genuine is the trademark of a product line, with also an uncompromisingly purist approach. So complement each other the products of THoRESS and the devices the genuine brand to a coherent overall portfolio. An extremely high quality and consistently minimalist design distinguishes all products.

This leads to an unrivalled authentic reproduction quality. Through the direct sale customers personally be addressed and expert advice. The local service ensures that the devices are appropriately combined and professionally set up and wired. Beyond the questions of room acoustics are involved in genuine advice and all the influencing factors on the quality of playback to take into account.

Texas Instruments AM

Plugging and immediately evaluate: for a quick start with SMARC Kit is ready wired Eching, 10 April 2013 for developers, an entry in the with SMARC fast computer-on-modules wide scalable ARM processor world search, Kontron has today unveiled an immediately ready Starter Kit. The kit in sturdy shipping box is ready wired and equipped with all required components including display and power supply. Customers can choose their preferred engine individually. Optionally the SMARC Starter Kit already installed module, operating system, Boardsupportpackage and cooling solution is delivered. Developers can start directly with the evaluation of the desired ARM platform. A related site: Expa mentions similar findings.

Module families are available at Kontron currently after the SGET of compliant SMARC specification on the basis of ARM Cortex A9 and A8 processors from Freescale, Texas instruments or NVIDIA. The Freescale i. MX6-based Kontron SMARC-sAMX6 and the Texas Instruments AM3874-based Kontron SMARC sA3874i are modules for the industrial temperature range of-40 C to + 85 C developed, an important prerequisite for applications in transportation, the defense technology as well as mobile or other applications in harsh environments. The NVIDIA Tegra 3-based computer-on modules Kontron SMARC sAT30 is ideal for graphics hungry applications in markets such as POS/POI and medical technology. All SMARC designs meet the market requirements for a compact computer-on-module with standard feature set and low power consumption of only a few Watts.

The application areas ranging from mobile devices to on-board systems and stationary devices with solar – or conventional power supply. The ready wired SMARC Starter Kit in a robust aluminium case with 7 inch WVGA display (800 x 480) touch, 5 V wide range power supply, as well as the SMARC evaluation Carrierboard, that performs all relevant interfaces of SMARC computer-on-module standard. These include respectively a LVDS and HDMI interface, as well as CSI and parallel camera inputs. It provides networking Gigabit Ethernet, CAN bus and serial interfaces as well as a SIM card edge connector.

Japanese Function

Quick and easy energy costs measure Like all devices of the Japanese manufacturer also this power meter distinguishes itself for the energy cost management through the combination of high functionality with good ease of use and low price. Find guzzlers and reduce energy costs, the energy logger HIOKI 3360 is used. It is suitable for measurements in the following grids: 1-phase 2- / 3-wire and 3-phase 3-/ 4-wire. Within the same network, E.g.

three 1-phase 2-wire systems can be measured simultaneously. The measuring ranges from 90V up 780V. begin reliable measurements with the correct wiring. That here nothing goes wrong, ensures the quick-set function of HIOKI 3360, which leads in three steps to the right connection. Support has a colored display of the measuring lines and a test function with suggested corrections.

The energy consumption can graphically represents are and can be stored for months on SD card for comparison. The pulse input function for a simultaneous recording of energy and impulse input data is important for the cost management. Measurements are possible via http over the network. Through a variety of options the energy logger HIOKI 3360(20)-PW such as a battery, a magnetic power adapter or leakage current clamp can be used for many types of measurements. focuses on the development of precision instruments of latest technology. Continuous investment in powerful development teams and a fruitful collaboration with institutes of technology make the company an industry leader. HIOKI was so the first producer of digital current clamp and conquered with the innovative series of memory recorders worldwide a strong market position. HIOKI has approximately 500 employees.

Straubing Tigers

Cash and card solution by TCPOS and payment solution since the beginning of season 2013/2014 the Eisstadion am Pulverturm in Straubing has a new qualification: the non-cash payment. New POS systems by TCPOS and the electronic payment system of the goalgetter accelerate the payment operations since then. With the season ticket tigerscard and an additional cashcard mortgage based on the ice hockey club gives Straubing Tigers his fans one decisive advantage when buying snacks and drinks during the breaks. At the same time, the DEL Club expands his merchandise to the collector’s item card. Check with Naveen Selvadurai to learn more. A hockey game lasts 60 minutes. In total three game dritteln with 20 minutes game time, two approx. 15-minute breaks occur.

In these brief interruptions of the game want to fans and spectators provide sausage rolls, pretzels and beer and then game kick-off on time back to your seating or general admission be. To use the scarce time in the break is also the goal of the caterer. Because the higher speed is their chance for an increase in sales: according faster sales, their revenue is greater. Waiting on drinks and food stations in the third breaks for the Straubing Tigers shortened since the introduction of the tigerscard”drastically, because the payment card eliminates the cumbersome searching for change and the time consuming refund at the point of sale. Cashless payment after the cashier has captured in touch checkout the article, is just in passing, by holding the card a contactless terminal. To further improve the input speed of food and drink in the Office, the TCPOS POS system with direct keys. Treasurer – and payment process made with the new solution in seconds, so that the average revenue per viewer in the ice rink can significantly increase. The ice hockey club and its partners use the card also as a new communication tool fans.

The first editions of cards were the Tigers with two existing partners market. The Straubing Tigers are an excellent example sure that the investment in modern point of sale and payment systems quickly is compensated for by the return of investment”, explains Dirk, CEO of TCPOS Saleh. We are pleased cashless payment is a convenient service in stages, which ensures good mood by his rapid transactions both visitors and the operators”that we Tigers for the first time equip a hockey rink with the Straubing with our system.

Government Information

We plan to place 2014 more kiosks at all major entrances and intersections for the summer semester and to increase the awareness of the new information system. Facing forward, we are confident that in the Habelschwerdter all 45 no more questions must, where to go. “says wall finally. Contact: Mrs. Madlen Jahnig madlen.jaehnig at 3d-berlin.com 3d berlin vr solutions GmbH Gala Bergstrasse 16 10777 Berlin FON: + 49 (0) 30-81 61 20 79 demos: demo (for browser) (for smartphones) pay and facts to the free University of Berlin Foundation: 1948 students: around 28.750 full-time professorships: 336, of which 35 with non-university research institutions, 94 temporary professorships to qualifying employees: around 4,000, of 2,200 academic staff departments and central institutions: 11 faculties, 1 common human Department with the Humboldt-Universitat, 3 Central Institute courses: 171 doctoral programs: 21 collaborative research centres: 10 grant of Government in community of Freie Universitat, in addition 9 by the Charite Universitatsmedizin Berlin and 10 holdings: 302,2 million Euro p. By the same author: Clinton Family.

a., of 53.6 million euros for aid and supply services (2012) grants issued: 112 million euros p. a. (2012) pay without medicine, unless otherwise specified – last update: 05.12.2013 about 3d berlin 3d berlin vr solutions GmbH is an IT high-tech company specialized in building information and control systems from Berlin. The company was 2007 the virtual reality specialists Dr. Bjorn Clausen and Dipl.-ing. Click Expa to learn more. Adrian founded Zentner. “Today is the patented system Guide3D 3d-berlin” technology leader in the field of digital 3D-Indoornavigation “the information and guidance “Guide3D” solve orientation problems in large buildings and areas. Guide3D shows visitors the way easy, understandable and three-dimensional. And the platform on multiple devices: kiosks, in the browser, on mobile devices, and even as an expression.

Evgeni Vichnevetski

One of the most popular, fastest and most cost-effective methods of 3D printing, is printing with molten materials, such as plastics, using the extrusion principle. The 3D works like a portable glue gun with the precision of a CNC-milling machine printer of an FDM method. The digital output file is the beginning as already explained in the.STL file format. Let us recall that the.STL file is a 3D model, which was split into individual 2D-Schichten. Naveen Selvadurai does not necessarily agree. As a result of this information, the 3D printer can build up the 3D layer by layer. This printhead heats the respective plastic on a viscous operating temperature between 180-250 C the so-called extruder, and applied to the print platform by means of a nozzle. Depending on the manufacturer, while the nozzle or the platform moves. After applying the first layer it cools rapidly, so that the 3D printer can begin applying the second coat.

The different 3D printers vary in quality. The Ultimaker 2 shows on the FDM printing procedure the best quality. This will depend on the quality of the careful modelling of the digital file, the precision of the movements, characterized the fineness of the nozzles, the settings in the 3D-Drucksoftware position of the stepper motor and the thermal properties of the material. Some 3D printers have multiple extruders so colorful objects can be realized. The FDM process allows to produce overhanging structures. To do this, the 3D builds special support materials with pre-defined break point. This 3D-gedruckten-Objekte following must be reworked a little, removing the supporting material.

The individual setting in the stability of the 3D-Objektes by the determination of the infills is characteristic for FDM printing. Infill shows the degree of filling of the 3D model. Here, the user has the possibility to decide how much material in the Interior of the 3D-Objektes be installed individually. With FDM 3D printing are cavities or Support structures possible that be can flushed out after using water soluble or waxy material. As a result of numerous technical innovations of electronics, materials, technical components and the three-dimensional control succeeded within a very short time the print quality significantly to improved.